DPA MMP-ES Side Modular Active XLR Cable

DPA MMP-ES Side Modular Active XLR Cable

The MMP-G Modular Active Cable is an ultra-transparent preamplifier. It can be combined with any modular capsule in the d:dicate Recording Microphones Series.

Key Features

• It features a high quality preamplifier split into a 12 mm housing and a 3-pin XLR connector
• These components attach the capsule to a cable at a length of 3 to 30 meters
• It is an ultra-transparent preamplifier with active drive for impedance balancing to reject frequency interference

Technical Specifications

Output connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Low-cut frequency, -3 dB
15 Hz
Noise with shorted input A-weighted
0.6 V
Output voltage, RMS
2.2 V
Output voltage, peak
3.1 V
Type of electronic circuit
Active
THD@1VRMS, 1kHz
< 0.2 %
Dynamic range
131 dB
Output impedance
100
Minimum load impedance
2 k
Cable drive capability
100 m (324 ft)
Output balance principle
Impedance balancing
Common mode rejection ratio (CMRR)
> 40 dB
Power supply (for full performance)
48 V Phantom power (- 4 V)
Current consumption
3.5 mA
Color
Matte black
Weight
91 g (3.2 oz)
Diameter
19 mm (0.75 in)
Length
3 m (9.8 ft)
Temperature range
-40 C to 45 C (-40 F to 113 F)
Relative humidity (RH)
Up to 90 %